Search This Blog

Showing posts with label hardyboard. Show all posts
Showing posts with label hardyboard. Show all posts

Friday, September 26, 2014

Copper Pan vs. Rubber Membrane-Unsanded vs. sanded grout-Durock vs. HardyBoard Lowes and Home Depot? Ask Chris I Tile Excellence

Is your plumber insisting on using a copper pan for your shower but you remember reading that rubber membranes were not only much more economical, but lasted forever, and did not leak or rust? You can't remember the details, but you want to talk to the plumber and ask questions or insist on using a rubber membrane, but you need your facts.   "ask chris", the do-it-yourself,  and consumer friendly tile installation blog of Tile Excellence, Inc, is written and answered personally by owner Chris Lawson based on his 34 years experience. There are posts all about copper pans vs. rubber membranes.

Doing it yourself? Tile on top of wood? Durock vs. Hardyboard? Is the tile from the designer store necessary, or can he purchase nice tile at a discount store or at Home Depot?

Hired a contractor or tile installation company?  Is three days a long time for installing a backsplash? Is uneven marble floor installation "expected" as you are being told?

At Lowe's or Home Depot and have a question about a product or material? Do you need sanded or unsanded grout? Less expensive thin set, or the more expensive one the salesperson recommended?

His searchable blog allows you instant access to your questions, ask questions or follow his helpful links.

Need more or need immediate answers? Call him directly! You'll find his email and direct number on his site, and almost without exception, he'll answer the phone the first time you call!

Monday, January 24, 2011

durock vs hardyboard? for best wet area tile installations

For hundreds mabye thousands of years tile was installed on concrete and concrete only. Here in New England we still have a lot of homes where the tile is laid upon concrete with wire nailed right to the wood studs,I tear them out all the time.In the 80's maybe earlier Durock(durable nailable concrete board reinforced with fiberglass for strength)  came out and the job became much easier and more precise.You just nail or screw your durock to your floor or wall and boom Lay tile right down, a wondrous thing  I used for about 15 years.But one time while in the tile store in Atlanta , I saw a new product Hardy board.

Now durock is great , but has one big weakness water gets through it its not a WATER BARRIER .Durock is not effected by water but it doesn't stop it either. Hardy board on the other hand is a actual barrier that stops ANY water penetration when properly sealed upon installation.Silicone II 50 year calk used to seal the hardy board joints will insure a waterproof installation and total protection of the wood wall studs underneath.Given the choice because both products cost the same I prefer to use hardy board in all my tile and marble installations, and most definitely  in all wet areas.

Featured Post

Home Renovation From Gut Rehab in Less Than 4 Months!

Home renovation finished products This house is a gut rehab ¹ job. My team and I started this project in April 2019 and it is now compl...

Our Most Popular Posts