Backsplash Installation LIVE-Part Five-An hour and a Half into the Job

                                                                             

Project Back Splash Installation LIVE

Marblehead, MA -October 27, 2014 -10:03 am

Part Five

1 hour and a half into the job and I would say I am about halfway done. Here is a picture of the progress chris

Sent from my T-Mobile 4G LTE Device

Backsplash Installation LIVE-Part Four-Wet Saw vs. 4 Inch Diamond Blade Grinder

Project Back Splash Installation LIVE

Marblehead, MA -October 27, 2014 -9:49 am

Part Four

                                  

As you can see from the photos, outlets are cut in such a way that the middle ears of the internal workings of the outlet lay upon the tile and the tile acts as a spacer making this a very simple process if you cut the tile precisely. Now I do have a wet saw, obviously is I'm a professional tile guy but very seldom do I use the wet saw. So most of the time I prefer a 4 inch grinder with a 4 inch diamond blade as pictured to make these small, but tedious cuts

Sent from my T-Mobile 4G LTE Device

BackSplash Installation LIVE-Part Three-Broke Joint Brick Pattern Tile

Project Back Splash Installation LIVE

Marblehead, MA - October 27, 2014 -9:23 am

Part Three

                            

As you can see , you start with a half  piece tile and a whole tile, which produces the brick pattern or Broke Joint Tile Pattern its known as. 

On electrical switches like the one pictured above, the ears of the internal workings of the switch are such a way that the tile acts as the spacer,  and you just screw those electrical outlets right back into the top of the new tile.  More Broke Joint Brick Pattern

Sent from my T-Mobile 4G LTE Device

-------- Original message --------
From: "Diana Smith (Google+)"
Date:07/31/2014 8:24 AM (GMT-05:00)
To: tile_excellence@yahoo.com
Subject: Chris, this was a picture from one of the...

Chris, this was a picture from one of the big storms in Gloucester, MA while you were sitting in front of pool in FL. You dog! View or comment on Diana Smith's photo » Google+ makes sharing on the web more like sharing in real life. Learn more. Join Google+

You received this message because Diana Smith shared it with tile_excellence@yahoo.com. Unsubscribe from these emails. You can't reply to this email. View the post to add a comment. Google Inc., 1600 Amphitheatre Pkwy, Mountain View, CA 94043 USA

Back Splash Tile Installation LIVE- Part Two- Broke Joint Tile Backsplash

Project Back Splash Installation LIVE

Marblehead, MA -October 27, 2014 -9:10  am

Part Two

Broke joint tile is tile that is set in an offset joint like bricks and you start out on 1 flat  side of the wall with half a piece and whole pieces to give yourself the offset pattern to begin the installation.  The first thing you do is cut yourself a few half tiles to install the broke joint tile . It is one of the easiest installations that you can do yourself because basically the tiles are offset in a brick pattern and there is no real straight line required except your horizontal line as you'll see in the next few posts You'll see what I mean .in a few minutes as I get some tile on the wall .It will be clear as to why this is a very simple installation for the homeowner or novice.

Sent from my T-Mobile 4G LTE Device