Showing posts with label rust. Show all posts
Showing posts with label rust. Show all posts

Copper Shower Pans vs. Rubber Membranes

Copper Shower Pans vs. Rubber Membranes 

shower head
I always want to give my customers and blog followers the best advice on the most economical yet highest quality tile-related installations. I've learned this information from years of hands-on doing of the jobs myself. As you may know from my actual web site I do all my jobs personally and have over 34 years of experience.co

In all those years out on the job I have pretty much seen it all. So when I make a recommendation on what's the best way to go, it's because I've weighed 
out the best options for my customers out there on he job. I also do repairs and always have: many in my industry overlook the repairs as not being lucrative enough to warrant their time, so I do get a lot of repairs.

The most costly repair is the leaky walk-in shower panwhich can sometimes be in 

excess of $500. I've done well over 100 of these repairs in my career and only 1 or 2% of these were rubber membrane repairs, while the other 98% were copper pans. In the instances of the rubber membrane repairs it was always improper installation by nails being nailed below the waterline. As we have all heard from the eco criers, it takes hundreds of years for plastic and heavy rubber products to deteriorate in the environment, so it only makes sense that a rubber membrane would almost never be affected by water and would surely last past my lifetime when installed correctly.

The copper pan, on the other hand, is metal and starts the deterioration process

almost immediately when in contact with water. We've all seen a green copper penny, and that green on the copper is just like rust on iron and steel. I have removed so many copper pans that were rusted through (for lack of a better word). I've seen it again and again: tearing out a shower floor and 12 inches up the wall because water was dripping into the living room ruining the ceiling and requiring more costly repairs.

Furthermore, copper pans are very costly even without repairs: most have to be 

custom-made and the plumbing labor is very expensive. The cost is $400 to $800 and even more depending on the layout of the shower floor to be dried in. On the other hand, I install rubber membrane to dry in the shower floor at a total cost of $175 and that includes the concrete in the floor to slope to the drain. I have several contractors who used to use copper who now call me to come out just to dry-in showers for them at a huge savings for a much more reliable and longer-lasting product. Using logic and common sense, it seems obvious that for less money and a longer-lasting, dependable shower floor the rubber membrane is the best call.
I don't supply materials on any of my jobs and don't ever gain monetarily on any of my recommendations: I speak only from experience and the desire for my customers to get the most for their money.
For more answers to all of your tile-related questions, visit my "Ask Chris" blog here
.
Read More

Tile Installation Guest Bloggers

It is so nice hearing about other tile professional's experiences and seeing materials and how-to instruction; very enlightening. That's what this blog is all about; sharing experiences, ideas and advise for consumers and DIY project enthusiasts. Thanks!

Guest Bloggers
Tile Installation Excellence Consumer Help Blog

Trugard Direct
Contact: Jake Kriser
Email: jake@trugarddirect.com


Contact: Tile Gal
Phone Number: 1-866-695-8992

Contact Form

Name

Email *

Message *

Followers

(C) 2010-2016 Diana Smith, SEO Powered Websites All Rights Reserved. Powered by Blogger.